Nema 11 (28mm) stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.1 / 3.7 |
| Ugbu a (A) | 1 |
| Nguzogide (Ohms) | 2.1 / 3.7 |
| Inductance (mH) | 1.5 / 2.3 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 0.05 / 0.1 |
| Ogologo moto (mm) | 34/45 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 28 | 2.1 | 1 | 2.1 | 1.5 | 4 | 9 | 0.05 | 34 |
| 28 | 3.7 | 1 | 3.7 | 2.3 | 4 | 13 | 0.1 | 45 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 20N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 8N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 28HS2XX-1-4A eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, ọkara micro-stepping, mbanye voltaji 24V
>> Banyere anyị
Anyị na-akwado 1st onye ahịa, 1st kacha mma, nkwalite na-aga n'ihu, uru otu na ụkpụrụ mmeri.Mgbe anyị na ndị ahịa na-emekọ ihe ọnụ, anyị na-enye ndị na-azụ ahịa ihe kachasị elu nke ọrụ.
Anyị nwere teknụzụ mmepụta dị elu, na ịchụso ihe ọhụrụ na ngwaahịa.N'otu oge ahụ, ezi ọrụ emewo ka aha ọma dịkwuo elu.Anyị kwenyere na ọ bụrụhaala na ị ghọtara ngwaahịa anyị, ị ga-adị njikere ịghọ ndị mmekọ na anyị.Na-atụ anya ajụjụ gị.