Nema 14 (35mm) stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 1.4 / 2.9 |
| Ugbu a (A) | 1.5 |
| Nguzogide (Ohms) | 0.95 / 1.9 |
| Inductance (mH) | 1.4 / 3.2 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 0.14 / 0.2 |
| Ogologo moto (mm) | 34/47 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 35 | 1.4 | 1.5 | 0.95 | 1.4 | 4 | 20 | 0.14 | 34 |
| 35 | 2.9 | 1.5 | 1.9 | 3.2 | 4 | 30 | 0.2 | 47 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 25N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 10N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 35HS2XX-1.5-4A eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, ọkara micro-stepping, mbanye voltaji 24V
>> Banyere anyị
Ngwa ngwa na ọkachamara mgbe ọrịre ahịa wetara site na ndị otu ndụmọdụ anyị nwere obi ụtọ ndị na-azụ anyị.Enwere ike iziga gị ozi zuru ezu na parampat sitere na ngwa ahịa maka nkwenye nke ọma. Olileanya ịnweta ajụjụ pịnye gị wee wulite mmekọrịta nkwado ogologo oge.
Mgbe ị na-enwe mmasị na ihe ọ bụla anyị na-eso na-elele ndepụta ngwaahịa anyị, biko nweere onwe gị ịkpọtụrụ anyị maka ajụjụ.Ị ga-enwe ike izipu anyị email na kpọtụrụ anyị maka alo na anyị ga-aza gị ozugbo anyị nwere ike.Ọ bụrụ na ọ dị mma, ị nwere ike chọpụta adreesị anyị na webụsaịtị anyị wee bata na ụlọ ọrụ anyị.ma ọ bụ ozi agbakwunyere nke ihe anyị n'onwe gị.Anyị na ndị ọ bụla nwere ike ịzụrụ ihe n'akụkụ ndị a na-emekọ ihe ọnụ na-adịte aka.