Nema 23 (57mm) moto stepper mechiri emechi
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.6 / 3.6 / 4.1 |
| Ugbu a (A) | 3/4/5 |
| Nguzogide (Ohms) | 0.86 / 0.9 / 0.81 |
| Inductance (mH) | 2.6 / 4.5 / 4.6 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 1 / 1.8 / 3 |
| Ogologo moto (mm) | 55/75/112 |
| Encoder | 1000CPR |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Nkọwa
Parụmọrụ
Nnukwu ibu ikike, obere okpomọkụ ịrị elu, obere ịma jijiji, obere mkpọtụ, ọsọ ọsọ ọsọ, ngwa ngwa nzaghachi, ezigbo ọrụ, ogologo ndụ, elu n'ọnọdu ziri ezi (ruo ± 0.005mm)
Angwa
Akụrụngwa nyocha ahụike, ngwa sayensị ndụ, robots, akụrụngwa laser, ngwa nyocha, akụrụngwa semiconductor, akụrụngwa mmepụta elektrọnik, akụrụngwa akpaaka na-abụghị ọkọlọtọ na ụdị akụrụngwa akpaaka dị iche iche.
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 57 | 2.6 | 3 | 0.86 | 2.6 | 4 | 300 | 1 | 55 |
| 57 | 3.6 | 4 | 0.9 | 4.5 | 4 | 480 | 1.8 | 75 |
| 57 | 4.1 | 5 | 0.81 | 4.6 | 4 | 800 | 3 | 112 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 70N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 15N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 57IHS2XX-X-4A eserese eserese moto
| Nhazi pin (dị iche) | ||
| Ntụtụ | Nkọwa | Agba |
| 1 | +5V | Uhie |
| 2 | GND | Ọcha |
| 3 | A+ | Nwa |
| 4 | A- | Acha anụnụ anụnụ |
| 5 | B+ | Odo |
| 6 | B- | Akwụkwọ ndụ akwụkwọ ndụ |
