Nema 24 (60mm) stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.1 / 2.9 / 3.2 / 3.7 / 4.1 |
| Ugbu a (A) | 5 |
| Nguzogide (Ohms) | 0.42 / 0.57 / 0.64 / 0.74 / 0.81 |
| Inductance (mH) | 1.3 / 1.98 / 2.3 / 2.83 / 3.23 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 1.5 / 2.5 / 3 / 3.5 / 4 |
| Ogologo moto (mm) | 55/75/84/100/112 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
Nha
20mm, 28mm, 35mm, 42mm, 57mm, 60mm, 86mm
Akụkụ Stepper
1.8°, 0.9°
Parụmọrụ
Oke kachasị elu ruo 6N.m, ịrị elu okpomọkụ dị ala, obere mkpọtụ, obere mkpọtụ, ogologo ndụ (ruo 5 nde cycles).
Angwa
Ngwá ọrụ nyocha ahụike, ngwa sayensị ndụ, robots, akụrụngwa laser, ngwa nyocha, akụrụngwa semiconductor, akụrụngwa mmepụta elektrọnik, akụrụngwa akpaaka na-abụghị ọkọlọtọ na ụdị akụrụngwa akpaaka dị iche iche.
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 60 | 2.1 | 5 | 0.42 | 1.3 | 4 | 340 | 1.5 | 55 |
| 60 | 2.9 | 5 | 0.57 | 1.98 | 4 | 590 | 2.5 | 75 |
| 60 | 3.2 | 5 | 0.64 | 2.3 | 4 | 690 | 3 | 84 |
| 60 | 3.7 | 5 | 0.74 | 2.83 | 4 | 850 | 3.5 | 100 |
| 60 | 4.1 | 5 | 0.81 | 3.23 | 4 | 960 | 4 | 112 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 70N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 15N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 60HS2XX-X-4A eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, ọkara micro-stepping, mbanye voltaji 40V