Nema 11 (28mm) oghere stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.1 / 3.7 |
| Ugbu a (A) | 1 |
| Nguzogide (Ohms) | 2.1 / 3.7 |
| Inductance (mH) | 1.5 / 2.3 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 0.05 / 0.1 |
| Ogologo moto (mm) | 34/45 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 28 | 2.1 | 1 | 2.1 | 1.5 | 4 | 9 | 0.05 | 34 |
| 28 | 3.7 | 1 | 3.7 | 2.3 | 4 | 13 | 0.1 | 45 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 20N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 8N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 28HK2XX-1-4B eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, enweghị ramping, ọkara micro-stepping, mbanye voltaji 24V
>> Banyere anyị
Biko nweere onwe gị enweghị ego iji zitere anyị nkọwapụta gị ma anyị ga-aza gị ngwa ngwa.Anyị nwere otu ọkachamara injinia ga-eje ozi maka mkpa ọ bụla zuru ezu.Enwere ike izipu ihe nlele efu maka gị onwe gị ka ị mara eziokwu ndị ọzọ.Ka ị nwee ike mezuo ọchịchọ gị, biko nwee mmetụta na-efu efu iji kpọtụrụ anyị.Ị nwere ike izipu anyị email wee kpọọ anyị ozugbo.Ọzọkwa, anyị na-anabata nleta na ụlọ ọrụ anyị si n'akụkụ ụwa niile maka ịmatakwu ụlọ ọrụ anyị.N'ahịa anyị na ndị ahịa nke mba dị iche iche, anyị na-agbasokarị ụkpụrụ nke nha anya na uru otu.Ọ bụ olileanya anyị ịzụ ahịa, site na nkwonkwo mbọ, ma ahia na ọbụbụenyi ka anyị na-erite uru.Anyị na-atụ anya inweta ajụjụ gị.
