Nema 8 (20mm) oghere oghere stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.5 / 6.3 |
| Ugbu a (A) | 0.5 |
| Nguzogide (Ohms) | 5.1 / 12.5 |
| Inductance (mH) | 1.5 / 4.5 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 0.02 / 0.04 |
| Ogologo moto (mm) | 30/42 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 20 | 2.5 | 0.5 | 5.1 | 1.5 | 4 | 2 | 0.02 | 30 |
| 20 | 6.3 | 0.5 | 12.5 | 4.5 | 4 | 3 | 0.04 | 42 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 15N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 5N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 20HK2XX-0.5-4B eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, enweghị ramping, ọkara micro-stepping, mbanye voltaji 24V
>> Banyere anyị
A na-emepụta ngwaahịa anyị na akụrụngwa kachasị mma.Oge ọ bụla, anyị na-emeziwanye mmemme mmepụta mgbe niile.Iji hụ na mma na ọrụ dị mma, anyị na-elekwasị anya na usoro mmepụta.Anyị enwetala otuto dị elu site na onye mmekọ.Anyị na-atụ anya ịmalite mmekọrịta azụmahịa na gị.
Ọ bụrụ na nke ọ bụla n'ime ihe ndị a masịrị gị, biko mee ka anyị mara.Anyị ga-enwe afọ ojuju ịnye gị ngụ mgbe ị natachara nkọwapụta nke onye.Anyị nwere ndị injinia R&D nwere ahụmahụ nke onwe anyị iji gboo mkpa nke onye ọ bụla, Anyị na-atụ anya ịnata ajụjụ gị n'oge na-adịghị anya ma nwee olileanya inwe ohere iso gị rụkọọ ọrụ n'ọdịnihu.Nnọọ ka ịlele ụlọ ọrụ anyị.
