Nema 17 (42mm) oghere stepper moto
>> Nkọwa dị mkpirikpi
| Ụdị moto | Bipolar stepper |
| Akụkụ nzọụkwụ | 1.8° |
| Voltaji (V) | 2.6 / 3.3 / 2 / 2.5 |
| Ugbu a (A) | 1.5 / 1.5 / 2.5 / 2.5 |
| Nguzogide (Ohms) | 1.8 / 2.2 / 0.8 / 1 |
| Inductance (mH) | 2.6 / 4.6 / 1.8 / 2.8 |
| Waya ndị ndu | 4 |
| Jide Torque (Nm) | 0.22 / 0.35 / 0.5 / 0.6 |
| Ogologo moto (mm) | 34/40/48/60 |
| Okpomọkụ gburugburu | -20 ℃ ~ +50 ℃ |
| Okpomọkụ Bilie | 80K kacha. |
| Ike Dielectric | 1mA kacha.@ 500V, 1KHz, 1Sk. |
| Nguzogide mkpuchi | 100MΩ Min.@500Vdc |
>> Asambodo
>> Igwe ọkụ eletrik
| Nha moto | Voltaji/ Usoro (V) | Ugbu a/ Usoro (A) | Nguzogide/ Usoro (Ω) | Inductance/ Usoro (mH) | Ọnụọgụ nke Waya ndị ndu | Rotor Inertia (g.cm2) | Jide Torque (Nm) | Ogologo moto L (mm) |
| 42 | 2.6 | 1.5 | 1.8 | 2.6 | 4 | 35 | 0.22 | 34 |
| 42 | 3.3 | 1.5 | 2.2 | 4.6 | 4 | 55 | 0.35 | 40 |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 0.5 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 0.6 | 60 |
>> General oru parameters
| Mwepu nke radial | 0.02mm Max (ibu 450g) | Nguzogide mkpuchi | 100MΩ @500VDC |
| Mwepu axial | 0.08mm Max (ibu 450g) | Ike dielectric | 500VAC, 1mA, 1s @ 1KHZ |
| Ibu radial kacha | 25N (20mm si flange elu) | Klas mkpuchi | Klas B (80K) |
| Ibu oke axial | 10N | Ọnọdụ okpomọkụ | -20 ℃ ~ +50 ℃ |
>> 42HK2XX-X-4B eserese eserese moto
>> Torque-ugboro usoro
Ọnọdụ ule:
Chopper mbanye, enweghị ramping, ọkara micro-stepping, mbanye voltaji 40V
>> Banyere anyị
Site na teknụzụ dị ka isi, mepụta ma mepụta ngwaahịa dị elu dịka mkpa dị iche iche nke ahịa si dị.Site na echiche a, ụlọ ọrụ ahụ ga-aga n'ihu na-emepụta ngwaahịa ndị nwere ụkpụrụ dị elu ma na-aga n'ihu na-emeziwanye ngwaahịa, ma nye ọtụtụ ndị ahịa ngwaahịa na ọrụ kacha mma!
Inweta isi echiche nke "ịbụ onye na-ahụ maka ọrụ".Anyị ga-edound elu na ọha mmadụ maka elu àgwà ngwaahịa na ezi ọrụ.Anyị ga-ebute ụzọ isonye na asọmpi mba ụwa ka ọ bụrụ onye nrụpụta ọkwa mbụ nke ngwaahịa a n'ụwa.
N'ezie, ọnụahịa asọmpi, ngwugwu dabara adaba na nnyefe n'oge ga-ekwe nkwa dị ka ihe ndị ahịa chọrọ.Anyị ji ezi obi na-atụ anya iwulite mmekọrịta azụmahịa gị na ndabere nke uru na uru n'ọdịnihu dị nso.A na-anabata anyị nke ọma ịkpọtụrụ anyị ma bụrụ ndị na-akwado anyị.
Anyị nwere 8 CNC lathes, 1 CNC-egwe ọka igwe, 1 waya ọnwụ igwe, na ụfọdụ ndị ọzọ machining ngwaọrụ.Anyị nwere ike ịmegharị ọtụtụ akụkụ ndị na-abụghị ọkọlọtọ site n'onwe anyị n'ụlọ iji belata oge ndu nke ngwaahịa ahaziri ahazi, na inye ndị ahịa anyị ezigbo ịzụrụ ihe.Ọtụtụ mgbe, oge ndu nke ngwaahịa moto nke ndu anyị bụ n'ime izu 1, yana oge ịghasa bọọlụ bụ ihe dị ka ụbọchị iri.
Ngwaahịa anyị na-arụ ọrụ 100% na nchekwa anwale tupu mbupu iji hụ na ngwaahịa enyere ndị ahịa nwere oke mma.
